Michael Jackson was a picky dresser, and he wanted to stand out. That’s why his costumes had a lot of details that made everyone wonder why they were there and what they meant. For example, almost every jacket Michael Jackson wore had an armband on the right sleeve, and some of his jackets also had “777” sewn onto them.
We at Bright Side are fascinated with Michael Jackson`s wardrobe, and we`re ready to reveal some of the secrets behind his costumes!
1. Why he wore smaller costumes at the end of his shows
Michael Jackson`s dance routines were very physically strenuous, and he gave his all during his performances. By the end of the show, he would often lose up to 5 lbs, and his waist would become one inch thinner. And since it was important that his clothes fit perfectly, so that he could show off his dance moves, every next costume was a bit smaller than the previous one.
2. How his lean shoes worked
Michael Jackson`s shoes that helped him defy the laws of gravity had a V-shaped clasp at the bottom of the heels. With its help, he could hook into a nail attached to the floor and perform his famous 45-degree forward tilt. However, to be able to do that and to keep his whole body straight, an incredible amount of core and leg strength was also needed.
3. Why he only wore one glove
Michael had vitiligo, a skin condition where patches of your skin lose pigment. It started on his hand and he wanted to cover it up. And he thought it would look too ordinary to wear 2 gloves, so he would only wear one.
4. Why almost every jacket had an armband on the right sleeve
Michel Jackson just wanted his clothes to be different from everyone else’s. And having an armband on a sleeve makes your look distinguishable. Michael also liked to make his fans wonder why that armband was there.
5. Why there are 3 № 7s sewn onto his jackets
Michael was the 7th child in his family. Also, he was born in 1958, and if you add 19 plus 58, it equals 77.
6. Why he never polished his shoes
Once, the singer`s managers were concerned about the condition of his shoes and asked his costume designer to polish them. He did it, but it made Michael extremely angry. He explained that the leather was worn off exactly as he needed it to be, and that polishing would make it too slippery for him to perform his dance moves.
7. Why he wore white socks
Michael loved wearing white socks for several reasons. No one else wore white socks with black shoes. Moreover, they would catch the light and attract attention to the movements of his feet when he was dancing.
8. Why he taped his fingers
Hand movements were an important part of Michael Jackson`s dance routines. So he and his costume designers decided to wrap white tape around his fingers in order to attract more light. Michael also decided it would be more unusual to only tape his index, ring, and pinkie fingers. It was also fun for him, because fans would ask why only 3 of his fingers were taped.
When Michael danced, he would unconsciously put his 2 untaped fingers together. And that would also add mysteriousness to his performances, since the fans would think this sign had a secret meaning.
9. What the letters CTE on his jackets stand for
These letters don`t stand for anything. In the 90s, Michael`s costume designers created a few new shirts for him. He liked them, but he wanted to add some letters on the epaulets. He said it didn`t matter which ones, so his costume designers put all of the letters of the alphabet into a hat, and took 3 of them out at random. That`s where the letters “CTE” came from.
Do you think Michael Jackson had great taste in clothes? Is there any costume of his that you like in particular? We`d love to hear your thoughts in the comments!
10 gems from Amazon that’ll help you solve somewhat embarrassing household problems
If you avoid inviting guests to your house because of cracks in walls, stubborn stains on carpets or rust in your bathroom, you came to the right place. In this selection, we’ll tell you about 10 amazing products from Amazon that will solve your embarrassing household problems in the blink of an eye.
1. No matter what stains are bothering you, this all-purpose cleaning paste will never let you down. It removes stains, grease and grime from just about anything, including stovetops, kitchen surfaces, floors, metal, ceramics, porcelain, marble, wood, silverware, jewelry, glass shower doors, toilets, sinks, bathtubs, car wheels, stainless steel surfaces, etc. The product lasts way longer than any liquid cleaner, which is the cherry on top.
2. Mold can be extremely annoying, but you can say goodbye to it if you use this instant mold and mildew stain remover spray. It works perfectly well on decks, wood, vinyl siding, drywall, concrete floors, brick walls, kitchen surfaces, and other areas where mold and mildew tend to grow. The product starts working instantly and targets deeply embedded stains that linger on surfaces and hard-to-reach areas.
3. Say goodbye to dirty bathroom with this weekly shower cleaner. It gently cleans buildup of soap scum, grime, and dirt in showers and bathtubs without scrubbing. Apply the product once a week with the attached sprayer, leave it for 8–12 hours and then rinse thoroughly with warm water. For heavy buildup, spray and rinse daily until the surface is clean. Thoroughly rinse the shower and the bathtub before use.
4. This drywall repair putty will help you get rid of embarrassing cracks on your walls in the blink of an eye. It works great for repairing holes and cracks in drywall, wall plaster, and wood. The convenient applicator allows you to apply the product evenly in circular motions. Thanks to its compact size, the product will fit in your toolbox.
5. This multipurpose portable carpet and upholstery cleaning machine will easily remove tough spots and stains from carpets, upholstery, car interiors, and more. It efficiently removes odors as well, which makes it a household must-have for families with pets. The machine has a large tank, which means you can clean more surfaces between refills.
6. This pumice stone for toilet bowl cleaning will remove the toughest stains, rust buildup and hard water rings. The convenient ergonomic handle eliminates the need for gloves, because your hands won’t touch the dirt as you use the item. Its gentle touch ensures that porcelain toilet bowls remain unscathed, which is the cherry on top.
7. This rust stain remover works wonders and the pictures below speak louder than any words. This powerful gel clings to dissolve rust stains on contact and no scrubbing is needed. Its fast-working formula quickly and easily removes the toughest rust stains from most surfaces around the house. This product is ideal for vertical and hard-to-reach surfaces like showers, sinks, tubs and toilets above the water line.
8. Try this bathtub and shower cleaner spray, and you won’t regret it. This fresh foaming spray will leave your bathroom sparkling clean without any harsh smells. This is a multipurpose shower spray that works wonders on tile, grout, fixtures, sinks, toilet seats, bathtubs, and even on shower walls, doors and curtains.
9. If you’re dreading cleaning your toilet tank, don’t worry. This toilet tank cleaner will do the tough job for you. Thanks to its strong citric acid formula, the product removes hard-water deposits and other stains in the blink of an eye. It removes bad odor as well, leaving your bathroom refreshed.
10. Say goodbye to mold, mildew, algae and moss with this multi-surface outdoor cleaner. It has a high-capacity trigger sprayer for quick application to smaller surfaces and removes green and black stains caused by moss, mold, mildew, and algae, with no scrubbing, no rinsing, and no pressure washing. Just wet it and forget it. The product works on multiple surfaces including porch steps, stones, fountains, planters, concrete, canvas, and upholstery.
Inside you will find promo codes for various product categories, including beauty and personal care, home improvement, clothes and accessories, products for kids, pets, and more.
Leave a Reply